|
|
|
Accu-shot
|
|
|
|
| |
our price |
|
 BT01 Non-locking version |
$52.20 |
|
It has Steel on Steel threads to insure long-life, tighter tolerances
and better accuracy. This basic unit used with a bipod, attaches to your
rifle's rear sling stud, providing repeatable elevation adjustments. One
piece unit constructed from machined T6061 Hard anodized Aluminum with Grade
8 fasteners and comes ready to attach to your rifle using an Uncle Mikes
Swivel. The leg folds up and retracts, allowing the concurrent use of your
sling. No tools required. Black only. Made in the U.S.A. Approximate
elevation range of 3.4 4.5" Approximate weight 4.8 ounces. |
|
|
Same as above but with the tac cap and quick knob.
+ $29.95 |
|
|
| |
our price |
|
 BT04 Locking version |
$66.45 |
|
The Locking version of our BT01 Accu-Shot monopod.
This has become our best seller for good reason.
With the Steel on Steel threads, it has all the same great features as the
BT01 with the addition of a second Thumbnut. By jamming this second Thumbnut
one can remove all of the tolerance found between the Male/Female threads.
Or with a bit more pressure "lock" the Actuator knob. This is the model to
buy for the highest degree of accuracy from your rifle from the Bench or in
the field. One piece unit constructed from machined T6061 Hard anodized
Aluminum with Grade 8 fasteners and comes ready to attach to your rifle
using an Uncle Mikes Swivel. The leg folds up and retracts, allowing the
concurrent use of your sling. Black only. Made in the U.S.A. Approximate
elevation range of 3.65 4.75" Approximate weight 5.6 ounces. |
|
|
Same as above but with
the tac cap and quick knob. + $29.95 |
|
|
| |
our price |
|
BT05 Stud |
$80.70 |
|
The new BT05 (SP5) is the result of a request from US
Special forces group wanting a taller monopod for use with their SR25 rifles
and is better suited for all AR based rifle platforms as the handgrip
dictates a taller monopod.
With the Steel on Steel threads, it has all the same great
features as the BT04 including the second Thumbnut. By jamming this second
Thumbnut one can remove all of the tolerance found between the Male/Female
threads. Or with a bit more pressure "lock" the Actuator knob. This is the
model to buy for the highest degree of accuracy from your rifle from the
Bench or in the field. One piece unit constructed from machined T6061 Hard
anodized Aluminum with Grade 8 fasteners and comes ready to attach to your
rifle using an Uncle Mikes Swivel. The leg folds up and retracts, allowing
the concurrent use of your sling. Black only. Made in the U.S.A. Approximate
elevation range of 4.75- 5.85" Approximate weight 6 ounces. |
|
|
Same as above but with the tac cap and quick knob.
+34.95 |
|
|
| |
our price |
|
BT06 Stud |
$80.70 |
|
You have asked for it, here it is! New for 2003 is the
Extended Locking version of our BT04 Accu-Shot monopod. With Steel on Steel
threads and all the same great features as the BT04 with the addition of
longer Actuator knob for those shooters seeking a higher shooting vantage
point. One piece unit constructed from machined T6061 Hard anodized Aluminum
with Grade 8 fasteners and comes ready to attach to your rifle using an
Uncle Mikes Swivel. The leg folds up and retracts, allowing the concurrent
use of your sling. Black only. Made in the U.S.A. Approximate elevation
range of 5.65 - 6.85". Approximate weight 7 ounces. |
|
|
| |
our price |
|
BT12 Picitinny version |
$71.16 |
|
The new patented Precision Rail monopod (PRM) was
inspired by the Magpul Precision Rifle Stock (PRS) and has several other
applications where a Picatinny rail is found, including as a folding
vertical fore grip. The PRM is our second departure from our original
monopod, the first being the ASAI which we borrowed the mechanics from to
provide a proven system for the PRM including the push button deployment and
retraction feature. Major components are constructed from T6061 Aluminum
with a hard anodize finish, internal components made from alloy steels, heat
treated to Rockwell 52 for long lasting strength and durability. All PRM's
come with a Thumbnut which allows the operator to "jam" the knob removing
all of the tolerance found between the Male/Female threads for an extremely
solid shooting platform. The leg folds up and retracts out of the way when
not needed. Black only. Made in the USA. Approximate elevation range of 3.5
- 4.75". |
|
|
Same as above but with the tac
cap and quick knob. + $29.95 |
|
|
| |
our price |
|
BT13 Picitinny version |
$85.45 |
|
This is our Mid-Range model of the new patented
Precision Rail monopod (PRM) inspired by the Magpul Precision Rifle Stock
(PRS) and has several other applications where a Picatinny rail is found
such as a folding vertical fore grip. The PRM line is our second departure
from our original monopod, the first being the ASAI which we borrowed the
mechanics from to provide a proven system for the PRM including the push
button deployment and retraction feature. Major components are constructed
from T6061 Aluminum with a hard anodize finish, internal components made
from alloy steels, heat treated to Rockwell 52 for long lasting strength and
durability. All PRM's come with a Thumbnut which allows the operator to
"jam" the knob removing all of the tolerance found between the Male/Female
threads for an extremely solid shooting platform. The leg folds up and
retracts out of the way when not needed. Black only. Made in the USA.
Approximate elevation range of 4.5 - 5.85" |
|
|
Same as above but with the tac cap and quick knob.
+34.95 |
|
|
| |
our price |
|
 BT08 Accuracy International |
$142.45 |
|
The patented Accu-Shot Accuracy International (ASAI)
monopod for the Accuracy International AE, AW and AICS systems. Major
components constructed from alloy steels, heat treated to Rockwell 52 for
long lasting strength and durability. The ASAI is attached via an
application specific nut without modification to the stock and is deployed
and retracted with the press of a button. The same actuator knob with steel
on steel threads and locking feature found on the BT04 is utilized on the
ASAI. The leg folds up and retracts out of the way when not in use. This
unit allows a range of travel of approximately 1.05" or elevation
adjustments between 3.45 - 4.5" (measured from center of lower buttstock
bolt clearance hole). Made in the USA. Approximate weight 8.5 ounces. |
|
|
Same as above but with
the tac cap and quick knob. + $29.95 |
|
|
|
Bi-pods The Atlas Bipod project has been a long journey, from
conception of what a bipod should be to a brief and frank discussion with
Mr. Harris at SHOT, where he expressed no interest in adding my concepts to
the Harris product line to what we see today as the Atlas bipod. The Atlas
has been tested by professionals and civilians alike, tested in the sands of
Iraq and found to not foul, tested in a Red Bull induced shooting session
and survived. The V7 Atlas is ready for you.
 |
Construction from T6061 Aluminum, Type III Hard Anodized
black |
|
Stainless steel springs and fasteners |
|
UHMW components used for smooth tracking |
|
15 degrees +/- of preloaded Pan |
|
15 degrees +/- of preloaded Cant |
|
Preload on Pan and Cant can be tightened by means of the
knurled knob |
|
Picitinny Rail Mount interface by either standard machine
screw fastener based clamp or optional ARMS 17S lever mount (we offer the
ARMS 17S on the BT10-LW17 but any lever mount with that same hole spacing
will work on the BT10-NC). |
|
Non orientated leg positioning use either hand to move leg
into any of the four leg positions; legs stowed back, 90 degrees straight
down, 45 degrees forward and stowed forward. |
|
All 4 leg positions are solid allowing the shooter to load
the bipod at the 45 and 90 degree positions. |
|
Non orientated leg length adjustment, Outer leg slides on
the Inner leg locating on any of five positions Ύ" apart and can be done
by either hand. |
|
Optional 3" leg extensions to increase height available.
|
|
Standard soft durable Rubber feet that are suitable for
many surfaces. |
|
Optional interchangeable Ski and Cleat style feet can be
swapped in the field with the press of a ball plunger with a bullet tip.
|
|
Optional mounting systems available for Accuracy
International and Sako rifles. |
|
Estimated range of elevation on the BT10 is 5-9" from the
surface up to the rail. |
|
Estimated weight of 10.5 ounces for the clamp on style
|
|
Proudly Made in America |
|
|
| |
our price |
|
Two Screws |
$208.95 |
|
Standard two screw clamp on style |
|
Construction from T6061 Aluminum, Hard Anodized black |
|
Stainless steel springs and fasteners |
|
UHMW components used for smooth tracking |
|
15 degrees +/- of preloaded Pan |
|
15 degrees +/- of preloaded Cant |
|
Preload on Pan and Cant can be tightened by means of the
knurled knob |
|
Picitinny Rail Mount interface by either standard machine
screw fastener based clamp or optional ARMS 17S lever mount. |
|
Non orientated leg positioning use either hand to move leg
into any of the four leg positions |
|
Leg positions are; stowed back, 90 degrees straight down,
45 degrees forward and stowed forward. |
|
All 4 leg positions are solid allowing the shooter to load
the bipod at the 45 and 90 degree positions. |
|
Non orientated leg length adjustment, Outer leg slides on
the Inner leg locating on any of five positions Ύ apart and can be done
by either hand. |
|
Optional 3 leg extensions to increase height available.
|
|
Standard soft durable Rubber feet that are suitable for
many surfaces. |
|
Optional interchangeable Ski and Multi Spiked style feet
can be swapped in the field with the press of a ball plunger with a bullet
tip. |
|
Optional mounting systems available for Accuracy
International and Sako rifles. |
|
Estimated range of elevation on the BT10 is 5-9 from the
surface up to the rail. |
|
Estimated weight of 10.5 ounces for the clamp on style
|
|
Made in America |
|
|
|
| |
our price |
|
Through Leaver |
$265.95 |
|
Lever Mount With ARMS
17S Mount |
|
Construction from T6061 Aluminum, Hard Anodized black |
|
Stainless steel springs and fasteners |
|
UHMW components used for smooth tracking |
|
15 degrees +/- of preloaded Pan |
|
15 degrees +/- of preloaded Cant |
|
Preload on Pan and Cant can be tightened by means of the
knurled knob |
|
Picitinny Rail Mount interface by either standard machine
screw fastener based clamp or optional ARMS 17S lever mount. |
|
Non orientated leg positioning use either hand to move leg
into any of the four leg positions |
|
Leg positions are; stowed back, 90 degrees straight down,
45 degrees forward and stowed forward. |
|
All 4 leg positions are solid allowing the shooter to load
the bipod at the 45 and 90 degree positions. |
|
Non orientated leg length adjustment, Outer leg slides on
the Inner leg locating on any of five positions Ύ apart and can be done
by either hand. |
|
Optional 3 leg extensions to increase height available.
|
|
Standard soft durable Rubber feet that are suitable for
many surfaces. |
|
Optional interchangeable Ski and Multi Spiked style feet
can be swapped in the field with the press of a ball plunger with a bullet
tip. |
|
Optional mounting systems available for Accuracy
International and Sako rifles. |
|
Estimated range of elevation on the BT10 is 5-9 from the
surface up to the rail. |
|
Estimated weight of 10.5 ounces for the clamp on style
|
|
Made in America |
|
|
|
| |
our price |
|
 Accuracy International |
$275.50 |
|
|
|
|
|
|
| |
our price |
|
BT24 Atlas Cleats |
$49.95 |
|
These optional Cleat
feet replace the standard Rubber feet with the press of a small stainless
steel plunger and will deliver a fully articulated aggressive foot to
support the bipod. Type III Hard anodized 6061T6 Aluminum with Stainless
Steel components. $49.95 per set. |
|
|
| |
our price |
|
BT23 Atlas Ski Feet |
$49.95 |
|
These optional Ski feet
replace the standard Rubber feet with the press of a small stainless steel
plunger and will deliver a fully articulated smooth surfaced foot to support
the bipod. Type III Hard anodized 6061T6 Aluminum with Stainless Steel
components. $49.95 per set. |
|
|
| |
our price |
|
BT22 Atlas 3" leg Extensions |
$49.95 |
|
These optional leg
extensions are installed with the press of a small stainless steel plunger
and will raise the elevation of the Atlas bipod 3 inches and can be used
with any style of foot. Type III Hard anodized 6061T6 Aluminum with
Stainless Steel components. $49.95 per set. |
|
|
| |
our price |
Atlas Bi-pod pouch |
$49.95 |
|
We are proud to introduce the new Atlas Bipod pouch that
will accommodate all models of the Atlas bipod as well as an internal pocket
for the leg extensions and an outer pocket that will accommodate either or
both sets of the optional Atlas feet. Made from 1000 Denier Cordura nylon
with a #10 double pull zipper, Mollie attachments on the back and a drain
hole in the bottom. Made by CSM gear in the USA and available in Ranger
Green and Coyote Brown. |
|
| |
|
|
|
|
| |
our price |
|
 |
$89.95 |
|
Here we have our Folding
Vertical Fore Grip using the base and mechanism from our Precision Rail
Monopod (PRM), adding a non-moving 3 handle that is knurled with two flats
machined into opposing sides where the Buna O-Rings will secure light
switches and/or lunch money or both.
Unscrewing the bottom will reveal a
storage compartment for a single 123 battery and placing a battery in there
positive side (+) towards the relieved cap will insure it wont be drained.
When the knob is folded up, the profile is reduced for a cleaner
presentation for lower rifle positions as well as reducing the stop or snag
point found with fixed vertical fore grips. American made with the main
components being constructed from 6061T6 with Type III Hard anodize and 4041
alloy steel with a R52 heat treatment. Get your grip on! |
|
|
|
Accessories |
| |
our price |
|
 |
$14.95 |
|
Replaces rear M1-A/AR-15 fixed sling loops with a
common sling stud. This is necessary for attaching the Accu-Shot to the
M1-A, SR and AR family of rifles. Simple installation requires a
Screwdriver. Made of steel. Black only. Made in the U.S.A. |
|
|
|
|
our price |
|
BT26 |
$34.95 |
| BT26 CAR Adaptor We
are proud to introduce the new Patent Pending CAR Adaptor that when
installed on your CAR collapsible stock allows our BT12 or BT13 Precision
Rail Monopod to be installed. This is a great option for shooters that want
the LOP adjustments available with the collapsible stocks yet want the
stability provided by the Accu-Shot Precision Rail Monopods. The BT26 CAR
Adaptor is ready to install, replacing the standard fixed loop on the stock
while providing the means to re-attach the fixed sling loop with the loop on
the left, right or bottom angled forward or back. The BT26 CAR Adaptor is
made in America from alloy steel with a Manganese Phosphate finish. |
|
|
|
|
our price |
|
BT15 3.35" rail |
$19.95 |
| The new BT15 3.35" 1913
Rail will accommodate hole patterns with a center to center spacing of 1.30
to 2.25" with a relieved base to accommodate curved surfaces. A standard
sling stud can be used as one fastener or two Button head machine screws can
be used (not included, see BT1517 (make the BT1517 a link to that part #))
to attach this rail to the forearm of standard rifle stocks. The BT15 can
also be attached to a horizontal surface on the Butt section to attach our
BR12 or BT13 Precision Rail Monopods. The BT15 also has a flush cup for that
style of sling swivels. |
|
|
|
|
our price |
|
BT17 4" rail |
$29.95 |
| The new BT17 - 4" 1913
Rail will accommodate hole patterns with a center to center spacing of 3.25
3.5" with a FLAT base to accommodate flat surfaces. A standard sling stud
can be used as one fastener or two Button head machine screws can be used
(not included, see BT1517(make the BT1517 a link to that part #)) to
attach this rail to the forearm of standard rifle stocks. The BT17 can also
be attached to a horizontal surface on the Butt section to attach our BR12
or BT13 Precision Rail Monopods. The BT17 also has a flush cup for that
style of sling swivels. |
|
|
|
|
our price |
|
BT19 Accuracy International |
$69.95 |
| The Atlas Accuracy
International Spigot (AAIS) Part number BT19 Is designed for use with the
BT10-NC Atlas Bipod that mounts directly to the AAIS which plugs into the
Accuracy International AI/AICS stocks utilizing the factory
retention/release mechanism. The AAIS is constructed from 6061T6 Aluminum
with a type II hard coat anodize mated with an alloy steel Spigot that is
finished with a Manganese Phosphate. The AAIS weighs approximately 4.7
ounces is proudly made in the USA and has a cost of $69.95. |
|
|
|
|
our price |
|
 BT19
with BT20 Accuracy International |
$54.95 |
|
The AAIS Rail set, Part number BT20 consists of
three pieces of 1913 rail that can be attached to the AAIS BT19 on the
bottom and both sides allowing for a multitude of options including mounting
of the BT10 and BT10-LW17 to the AAIS. These rails are made from 6061T6
Aluminum with a type II hard coat anodize and come complete with fasteners
they are proudly made in the USA and cost $54.95. |
|
|
|
|
our price |
|
BT28 AFAR Kit |
$34.95 |
| Accuracy
International Freeland Anschutz
Rail Kit - We are proud to introduce the new Patent Pending
AFAR Kit, that will mount into theses accessory rails and provide a low
profile 1913 Picitinny rail for attaching the BT10 or BT10-LW17 Atlas Bipod
or other accessories to. This is a great option for shooters that have these
accessory rails and want to use their Rail Mount Atlas on several rifles.
The BT28 AFAR Kit is ready to install, the uniquely dimensioned nuts will
fit into the rails and slots one direction or rotated 90 degrees to another
dimension. We suggest using some Loctite such as 243 when installing.The
BT28 AFAR Kit is American made from 6061-T6 Aluminum with a Milspec Type III
hard coat black with 4041 Alloy steel fasteners. |
|
|
|
|
our price |
|
BT29 TRG rail kit |
$34.95 |
|
BT29 Sako TRG
Rail Kit - We are proud to introduce the new Sako TRG Rail
Kit (TRGR pronounced trigger Kit) that comes complete and ready to install
on your Sako TRG rifle butt stock allowing for the installation of our
proven Accu-Shot BT12 Precision Rail Monopod (BT12-QK is shown but not
included). Installation of the TRGR Kit DOES require the
temporary removal of the butt pad assembly and a second hole to be drilled,
all of which can be accomplished with common hand tools. The main components
are constructed from 6061T6 having a black Mil-Spec type III Hard Anodized
finish and is assembled using two 10-32 cold formed Flat Head Cap Screws, a
40 durometer rubber cushion is included. American made for shooters around
the world.
Installation requires removal of the Butt Plate Base and Butt Plate
Fastening Rail exposing the lower .50 ID frame tube. Remove any obstructions
from this tube, insert the Bar Nut into the frame tube, using the long Guide
Screw locate the Bar Nut hole furthest away from the Guide Screw under the
stocks factory hole. Insert 10-32x3/4 screw through the hole in the widest
portion of the Rail, threading into Bar Nut making sure the Rail is in-line
with stock, mark location for second hole. Remove Rail and Bar Nut, drill a
13/64 (.203) DIA. hole, re-install Bar Nut, Rail, Cushion and fasteners. |
|
|
